MELT-BLOWN POLYPROPYLENE CARTRIDGES
The construction of this pure polypropylene, surfactant-free depth filter ensures low pressure drops, with exceptional dirt holding capabilities. ACS-1 series uses no resin binders, lubricants, antistatic or release agents or other chemical additives.The one-step manufacturing process continuously extrudes and thermally bonds pure polypropylene microfibers into a complex filter matrix. Cartridges are characterized by excellent sediment absorption of sand, silt, rust and suspended solids from potable water.

Description:
Aquafilter offers FCPS cartridges suitable for POU (Point of Use) and POE (Points of Entry) installations. Through its polypropylene filter media, FCPS series removes solids in suspension in a wide range of micron rating, protecting your water stream and enhancing a continuous supply of fresh and clean drinking water.

FSPS, Cartridge for mechanical water treatment
The cartridge made of foamed polypropylene is designed for the
mechanical purification of water from sand, dirt and rust. The size of
fractions 1 - 100 microns. Recommended for pre-treatment of water.
Porosity of 1-100 microns
Standard SlimLine / BB
Size 5-40 (2 1/2 - 4 1/2) inches
Operating temperature from +2 to +40 ° C
The recommended filtration rate is 10-75 l / min.
IMPORTANT: Rinse the filter until the filtered water is clear (at least 2-5 liters).
Do not use with water that is microbiologically unsafe or of unknown quality
without the necessary disinfection before or after the system. Cartridges are
designed to filter only cold drinking water. We recommend regular scheduled
maintenance and replacement of the filter cartridge for proper product
operation.
Improper use, installation and maintenance may result in property damage or
flooding.